
Commercial roof repair in Dearborn, MI works best when the repair matches the actual defect and the existing roof system. Core Values Construction provides commercial roof repair for commercial and industrial buildings with flat and low-slope roofs, and this page explains the common defects behind commercial roof leaks, the repair methods that fit each one, and how to compare repair proposals so you know what each one covers.
If you have an active leak or a repair you want scoped, call (517) 260-3957 to schedule an assessment. A repair scope should be tied to the identified defect or likely entry point rather than only the place where water appears inside.
Common Causes of Commercial Roof Leaks

Water seen inside a building does not necessarily appear directly below the roof entry point. It can travel within the roof or building assembly before it becomes visible indoors. Finding the real entry point is the first step of any repair, and most commercial roof leaks start at a short list of places:
- Seams and laps: Membrane seams can deteriorate or separate as the roof ages, moves, and weathers through seasonal temperature changes.
- Flashings and terminations: Wall bases, parapet caps, curbs, and edge metal can develop sealant, flashing, fastener, or termination defects that allow water into the assembly.
- Penetrations: Pipes, conduit, vents, and rooftop unit connections each add a detail that can fail.
- Punctures and impact damage: Foot traffic, dropped tools, debris, and equipment service can cut or crush the membrane.
- Drains and ponding areas: Clogged or restricted drains and recurring standing water can indicate drainage conditions that need to be addressed with the repair.
- Blisters and splits: Blisters, splits, or displaced membrane can involve moisture, movement, adhesion, or substrate conditions that may require more than a surface patch.
Repair Methods That Fit the Roof System
A repair should be compatible with what is already on the roof. A patch that suits one membrane can fail on another, so the first question is what the existing system is: single-ply such as TPO, PVC, or EPDM, a built-up or modified bitumen roof, or something else. On single-ply roofs, repairs generally involve preparing the affected area and using a patch, flashing, seam method, or accessory compatible with the specific membrane and its written repair requirements. Seam problems may be repaired with a compatible method when the surrounding membrane and attachment remain suitable. Failed flashing details may need to be rebuilt or replaced rather than covered with surface sealant alone.
Repairs work best when the surrounding roof is still in serviceable condition. If moisture extends into insulation or other concealed materials, the repair scope may need to include removal, replacement, or another moisture-specific correction rather than a surface patch alone. Likewise, a membrane repair does not resolve a drainage problem if recurring standing water is caused by outlet restrictions, slope, substrate movement, or another underlying condition. Good repair work addresses the source of the leak and the conditions that led to it.
When a repair is not enough
Sometimes the better answer is a larger scope. Repeated leaks in different areas, widespread membrane deterioration, broad moisture involvement, attachment problems, or deck and substrate damage can justify comparing a larger scope. In those cases, the owner may need to compare localized repair with a broader repair, restoration, or replacement scope based on the documented condition. A contractor should explain why, based on what was found, rather than suggesting a bigger project by default.
Matching defects to repair scope
The table below shows how common defects usually translate into repair scope, and what might signal that more work is needed.
| Defect | Typical repair approach | May call for more work when |
|---|---|---|
| Open seam or lap | Prepare and repair the seam using a method compatible with the specific membrane and seam construction | Seams are failing across many areas of the roof |
| Puncture or cut | Prepare and patch the damaged area with a method compatible with the existing membrane | Insulation below the damaged area is wet |
| Failed flashing or termination | Repair or rebuild the flashing and termination detail with materials compatible with the existing roof system | Walls, parapets, or curbs are deteriorated or moving |
| Penetration leak | Repair or replace the affected boot, pipe flashing, curb, or penetration detail as appropriate | Equipment placement or roof layout keeps stressing the detail |
| Ponding or drain problem | Clear obstructions where appropriate and repair affected drains, scuppers, and nearby roof materials | Water remains after rain because of deck deflection or slope issues |
| Blister or split | Evaluate the blister or split and repair the affected area with moisture and substrate conditions included in the scope | The membrane is brittle or shrinking across the roof |
How to Compare Commercial Roof Repair Proposals
Two repair proposals can look similar and still cover very different work. When you compare them, check these points:
- Source of the leak: Does the proposal identify the suspected entry point or defect and explain what evidence supports that conclusion?
- Materials and method: Are the patch and flashing materials compatible with your existing roof system, and is the method described?
- Wet insulation: Does the scope explain how concealed moisture will be evaluated and how affected materials will be handled if found?
- Related conditions: Does it address nearby drainage, flashing, seam, penetration, or substrate conditions that may be related to the leak?
- Access and protection: How will the work be staged, and how will the interior and occupants be protected during the repair?
- Documentation: Will you receive photos or a written description of what was repaired? Any warranty or workmanship terms should be stated in writing.
Owners should keep their own role simple and safe. Observe from the ground or from inside the building, note where and when leaks appear, and take photos of interior stains. There is no need to walk the roof, and doing so can add damage and risk.
Commercial Roof Repair Services
Core Values Construction handles commercial roof repair as part of its broader commercial roofing services for businesses and property owners. If you want to see how we approach a similar scope, our flat roof repair in Detroit page covers repair on low-slope roofs in a neighboring market. Once a leak is fixed, a regular roof maintenance plan helps catch seams, flashings, and drains before they leak again. You can also see the full range of commercial roofing services we provide.
For commercial roof repair in Dearborn, MI, call (517) 260-3957 to schedule an assessment and discuss the right scope for your building.
Frequently Asked Questions
How do I know if my commercial roof can be repaired instead of replaced?
Localized defects may be repairable when the surrounding membrane, attachment, insulation, and substrate remain suitable. Widespread leaks, moisture, or deterioration can justify a larger scope.
What causes most commercial roof leaks?
Seams, flashings, penetrations, punctures, membrane damage, and drainage conditions can all become leak sources. An interior stain does not by itself identify the roof entry point.
Can a commercial roof be repaired in cold weather?
Cold-weather repair options depend on the roof system, materials, temperature, surface moisture, and product requirements. Temporary or permanent methods should follow the conditions allowed for the selected repair system.
Will a roof repair disrupt my business?
Disruption depends on access, repair location, interior conditions, equipment, weather, and the scope of work. Access, staging, and interior protection should be planned before work begins.
