
Choosing single-ply roofers in Brighton, MI means comparing both the contractor and the membrane system they propose. Core Values Construction installs and services single-ply roofing, including TPO, PVC and EPDM, on commercial and industrial buildings with flat and low-slope roofs. This page explains how to assess a single-ply proposal, which questions separate comparable bids, and when a roof needs service.
If you already have a roof in mind to repair or replace, call (517) 260-3957 to talk through your building and goals. The sections below give you a checklist to use with any contractor you consider.
Single-Ply Roofers: Providing Durable Roofing Systems
Single-ply roofing refers to flexible membranes installed in one layer over a commercial roof assembly. They are commonly used on flat and low-slope roofs because they form a continuous waterproof surface when installed correctly. These membranes may be specified on warehouses, retail buildings, offices and other low-slope commercial roofs because they can be detailed around drains, curbs and penetrations.
A single-ply roof can be inspected and, where the system and surrounding materials permit, repaired in sections. Its performance still depends on the whole assembly: the deck, insulation, attachment, drainage, seams and flashings. That is why the contractor’s scope matters as much as the membrane name.

Common Single-Ply Membrane Options
Single-ply systems are typically TPO, EPDM or PVC. Each has different strengths, and the right choice depends on building use, rooftop traffic, exposure and budget. TPO is often chosen for its light-colored surface and welded seams. EPDM is a flexible rubber membrane with seams typically joined by adhesives or tapes, and PVC is a heat-welded membrane that may be specified for certain grease or chemical exposures when the chosen product is approved for those conditions. Manufacturer requirements govern which assemblies and products are approved.
Our system pages go into more detail: TPO single-ply roofing in Brighton, PVC single-ply roofing in Brighton and EPDM roofing in Brighton.
Single-Ply Roof Suitability Matrix
The matrix shows what to check on your roof and what a contractor should confirm in writing. Project conditions, applicable code and the chosen manufacturer’s approved assembly govern the final specification.
| Factor | What to check | What the contractor should confirm |
|---|---|---|
| Substrate condition | Deck type and condition, and whether an old roof is removed or covered | Tear-off or recover, how deck damage is handled, and any cover board or separation layer under the membrane |
| Drainage | Slope, drains, scuppers, and areas that hold water | Tapered insulation or drain work needed so water leaves the roof |
| Attachment | Mechanically fastened, fully adhered, or ballasted options | The attachment method chosen and the applicable wind-uplift requirements and how the proposed assembly meets them |
| Insulation | Existing insulation type, condition and moisture | Insulation type and thickness, and whether wet insulation is replaced |
| Rooftop activity | Foot traffic, equipment service, debris, and any grease or chemical exposure | Membrane thickness, walkway protection, and whether the exposure suits the chosen membrane |
| Detailing | Penetrations, curbs, parapets, drains and edges | Flashing scope at every detail and the seam method used there |
| Service access | Roof access, staging, tenants and operations during work | Access plan, interior protection, and phasing if the building stays in use |
Seam and repair compatibility by membrane
Repairs and additions depend on matching the membrane that is already on the roof. The table summarizes the main points, and the manufacturer’s requirements govern a specific project.
| Membrane | Typical seam method | Repair and compatibility point | What to confirm |
|---|---|---|---|
| TPO | Heat-welded | Compatible patches and flashings, welded to a cleaned surface | Membrane on the roof, welding method and weld checks |
| PVC | Heat-welded | Compatible PVC patches and flashings, and awareness of materials that can affect PVC in contact with it | Membrane on the roof, separation layers, and manufacturer requirements |
| EPDM | Adhesives or tapes | Repairs use materials made for EPDM, and surface preparation matters for adhesion | Seam and repair materials and the preparation steps |
| Mixed membranes | Different on each side of a transition | Different membranes are not interchangeable and are generally not welded to one another | How the transition is detailed and which membrane is on each part |
Signs You May Need Single-Ply Roofing Service
Common warning signs include recurring leaks, open seams, punctures from rooftop traffic, damaged flashing around penetrations, and areas where water collects after rain. Interior signs may include ceiling stains, damp insulation or musty odors, especially after storms. Owners can watch for these from the ground and from inside the building, and leave roof access to the crew.
Repeated repairs in the same location are another sign. If the same leak returns, the cause may not have been corrected. A documented commercial roof inspection in Brighton helps decide whether the problem is localized or whether the roof is nearing the point where restoration or replacement should be compared.
Single-Ply Roofers You Can Trust
The roof protects tenants, inventory, equipment and operations, so a proposal should be specific enough to compare line by line. Ask each contractor for the product and thickness, insulation and attachment method, flashing scope, exclusions, schedule and warranty documents. A bid that leaves these out cannot be compared with one that includes them.
Questions that separate comparable bids
- Which membrane, thickness and manufacturer are priced, and is the assembly approved by that manufacturer?
- How is the existing roof handled, and how are deck damage and wet insulation addressed?
- How are drains, penetrations, curbs and edges flashed?
- How will the building stay protected and in use during work?
- What warranty documents come with the work, including coverage, exclusions and transfer terms?
Planning around the work
Staging, access, tenant communication and specifying temporary weather protection between work periods all affect how a project runs. Once the system is chosen, the scope follows the roof’s condition: a commercial roof repair for localized defects, or a commercial roof replacement when conditions are widespread. A commercial roof maintenance plan keeps drains, seams and flashings in good condition afterward.
To discuss single-ply roofing for your building in Brighton, MI, call (517) 260-3957 and ask about an estimate.
FAQ
What types of buildings suit single-ply roofing?
Single-ply membranes are commonly used on flat and low-slope commercial buildings such as warehouses, offices, retail spaces and multi-tenant properties.
How do I know which membrane is right for my roof?
It depends on roof use, exposure, drainage and the manufacturer’s requirements. A roof evaluation can show whether TPO, EPDM or PVC fits the building.
Can a single-ply roof be repaired instead of replaced?
Often. If damage is localized and the rest of the roof is sound, repairs to seams, flashing or punctures can be appropriate, using materials compatible with the membrane.
How can I compare two single-ply roofing bids?
Check that both name the product and thickness, insulation, attachment, flashing scope, exclusions and warranty terms. If one is silent on an item, ask for it in writing.
