Core Values Construction provides commercial roof inspections for buildings in Farmington Hills, MI. This page explains what an owner should receive from an inspection, how thermal and moisture findings should be treated, and how the report leads to a scoped repair, restoration or replacement estimate. To arrange an inspection for your building, call (517) 260-3957.
An inspection is only as useful as the evidence it produces. A report with dated photos, marked defect locations and ranked actions lets an owner decide on maintenance, repair or replacement and compare any contractor’s estimate against the same facts.
What a Commercial Roof Inspection Report Should Include
The outline below shows the sections an owner should expect. It is a guide for judging any inspection report, and the scope of a specific inspection should be agreed in writing.
| Report section | What it contains | How the owner uses it |
|---|---|---|
| Roof description | Roof type, approximate age if known, size, and the areas inspected | Shows whether the whole roof was covered and which sections were not |
| Dated photos | A photo of each finding with the date taken | Gives a baseline for comparison at the next inspection |
| Defect locations | Findings marked on a roof plan or described by location | Lets a contractor find the same spots and scope work accurately |
| Moisture findings and limits | Where moisture was found or suspected, the method used, and what that method cannot confirm | Shows whether more testing is needed before deciding on repair or replacement |
| Prioritized actions | Findings ranked as urgent, near-term or monitor | Supports budgeting and scheduling |
| Reinspection triggers | Events or conditions that should prompt another look, such as a major storm or a completed repair | Sets the follow-up plan |
A useful report also identifies portions that were not inspected, such as inaccessible rooftop equipment areas or concealed roof layers. Those exclusions matter when deciding whether a written repair price is complete. Owners can compare dated findings at future visits rather than rely on an estimated remaining service life without supporting conditions.
When Thermal Findings Need Confirmation
Infrared or thermal imaging can point to areas where moisture may be trapped in the roof assembly, but it is an indicator and not a final answer. Results depend on weather, time of day and roof construction, and a warm or cool area on a scan can have causes other than wet insulation. When a scan suggests moisture, the finding is usually confirmed with another method, such as a moisture meter reading or a small core sample, before it drives a major decision. A good report distinguishes confirmed findings from suspected conditions and recommends the next suitable test.
Who Receives the Report and How It Informs an Estimate
The inspection findings should be delivered to the property owner or designated manager in the form agreed for the assessment. Others responsible for budgets or maintenance may need the findings to coordinate authorized follow-up. A contractor can then prepare a scoped estimate that matches the documented conditions. The table below shows possible next steps, not automatic diagnoses. An estimate should reference the report findings, the inspected area, limitations, materials and exclusions.
| What the report shows | Likely next step |
|---|---|
| Isolated defects on a sound roof | A scoped repair for the listed locations |
| Several related defects, such as seams and flashings | A broader repair scope or a restoration comparison, depending on the membrane and moisture findings |
| Widespread wet insulation or deterioration | A comparison of replacement scopes, with further moisture confirmation if needed |
| Roof in good condition with minor items | Monitor items and set a maintenance and reinspection schedule |
| Thermal or moisture indicators that are unconfirmed | Confirmation with another method before a major decision |

For high-priority conditions, the report should distinguish measures needed to protect occupants or equipment from work that can be scheduled. If roof moisture is suspected but not confirmed, the recommended testing and affected area should be clear before the owner authorizes removal or replacement. The inspection report itself is evidence for the next decision, not proof that a repair has already been completed.
Response Times and Scheduling
When a leak or storm damage prompts an inspection, timing matters, because water can move into insulation and the building below. Inspection scheduling depends on the request, roof access, weather and available crew capacity. The company should confirm the visit window for the actual building. When you request an inspection, ask for a visit window, who will be on site, what access is needed, which testing is included and when the agreed report will be supplied.
About Our Company
Core Values Construction provides commercial roofing services for Michigan buildings, including Farmington Hills. The project gallery shows examples of published work, and the commercial roofing services overview describes inspection, repair and maintenance capabilities. The inspection scope and any additional investigation should be clear in a written proposal before a separate repair estimate is prepared.

Inspections and Utility Costs
A roof inspection is not an energy audit, and it does not promise lower utility bills. It can document roof conditions that warrant separate evaluation, including possible wet or damaged insulation, exposed gaps or failed flashings. An inspection does not measure building-wide air leakage or predict energy savings. Whether fixing those conditions changes energy use depends on the building and the work done, so treat any savings as possible and not guaranteed.
Our Services
Core Values Construction offers roof inspections, repairs, coatings and roof installation for commercial buildings. Inspection findings can help identify which parts of the roof need attention and distinguish visible defects from unknown conditions. Depending on the results, the next step may be a scoped repair, planned maintenance, a restoration evaluation or replacement. The commercial roofing services overview explains those services, while the single-ply roofing overview explains why the membrane type affects evaluation and repair methods.
Call Us Today
For a commercial roof inspection in Farmington Hills, MI, call (517) 260-3957 or use the contact page. Confirm what access, roof areas, photographs, testing, report format and follow-up recommendations are included before the inspection is scheduled.
Frequently Asked Questions
What should I receive after a commercial roof inspection?
A useful report includes a roof description, dated photos, defect locations, moisture findings and their limits, prioritized actions and reinspection triggers.
Is a thermal scan enough to confirm wet insulation?
Not by itself. A scan can point to areas of concern, and the finding is usually confirmed with another method before a major decision is made.
When should a commercial roof be inspected?
Owners commonly schedule inspections after major storms, when a leak is suspected, before buying or selling a property, and as part of a regular maintenance plan.
Can an inspection report help with an insurance or warranty question?
It can serve as documentation of the roof’s condition. Insurance and warranty requirements vary, so check the written terms that apply to your building.
