
A commercial roof inspection in Dearborn, MI can be scheduled as part of a maintenance plan and also when a specific event changes the roof’s risk or condition. Event-driven inspections answer a focused question: did something change, and what does the roof condition show now? Triggers can include a significant storm, repeated leaks, new rooftop equipment, a property transaction, or a written inspection requirement. On a flat or low-slope roof, an inspection checks the membrane, seams, flashings, drains, penetrations and the condition of the roof around them.
Core Values Construction provides commercial roof inspections for building owners and property managers in Dearborn, MI. This guide explains when to call for an inspection outside the routine schedule, what it should cover and what the owner should expect to receive afterward. To arrange one, call 517-260-3957.
Routine Inspections and Event-Driven Inspections

A routine inspection follows a schedule based on the roof system, condition, repair history, drainage, rooftop traffic, equipment work, and any written manufacturer or warranty requirements that apply. Consistent records show how conditions change over time and help distinguish recurring issues from new damage. A planned roof maintenance program usually includes this kind of recurring look.
An event-driven inspection responds to a specific condition or change. Its purpose may be to document possible storm damage, trace repeated leaks, evaluate work around rooftop equipment, or establish roof condition during a transaction. The scope should match the event rather than assume every trigger requires the same inspection.
Events That Justify an Inspection
The table below lists common triggers, why each matters on a commercial roof and what the inspection should focus on.
| Trigger | Why it matters | What to check |
|---|---|---|
| Severe wind, hail or heavy storm | Visible interior leakage is not required for roof damage to exist | Membrane punctures, lifted edges, displaced flashing, debris, damaged equipment |
| Repeated leaks or recurring stains | Repeated leaks may indicate that the prior repair did not address the full source or surrounding condition | Seams, penetrations, flashings, drains, signs of wet insulation |
| Sale, purchase or lease transition | Documented roof condition can inform budgeting and transaction discussions | Overall condition, documented defects, remaining repair needs, records on file |
| New or moved rooftop equipment | Service traffic, new penetrations, curbs, or equipment changes can affect roofing details | Walkway wear, curb flashings, new penetrations, condensate and drainage |
| Warranty milestone or required inspection | Some written warranties or maintenance programs may include inspection or documentation requirements | Condition against the warranty document, maintenance records |
| Ponding after rain | Recurring standing water may indicate drainage, slope, or roof-surface conditions that need evaluation | Drain flow, low spots, membrane condition where water sits |
An inspection report may also be useful when an owner is documenting conditions for an insurance discussion. Coverage and claim use depend on the policy, cause of loss, and insurer’s review.
What a Flat Roof Inspection Covers
A commercial inspection works through the roof system component by component. The membrane surface can be checked for punctures, splits, blisters, surface wear, displacement, or other visible damage. Seams are reviewed for openings or separation, while flashings at walls, curbs, penetrations, and edges are checked for attachment, material condition, and sealant or transition defects.
Drains, scuppers, and gutters are checked for debris, blockage, and visible drainage conditions, while low areas or standing-water marks are documented for further evaluation where needed. Rooftop equipment, curbs and pipe penetrations are looked at for wear and for how they were flashed. The inspector also notes interior signs, such as ceiling stains, that can point to a problem location. Building owners and staff can contribute by observing from the ground or inside the building and reporting stains, drips or debris. They should not walk the roof.
Photos, Location and Priority
A useful inspection report gives the owner evidence that can support the next decision. That may include dated photos, clear locations for findings, inspection limitations, and a priority or recommended next step for each material issue. If moisture screening or testing was used, the report should state the method, what was observed, and any limitations on what that method can establish. This documentation lets the owner compare one inspection to the next and gives any contractor writing an estimate the same findings to work from.
Timing in Michigan
Michigan weather can expose commercial roofs to temperature changes, snow, ice, rain, and storm events, but the need for an additional inspection should follow the actual event and observed condition rather than a fixed seasonal rule. After a significant event, a new leak, visible damage, or rooftop work, document conditions promptly enough to guide the next repair or maintenance decision. If the inspection finds an active leak, the next step is often a flat roof repair, and the findings help scope it.
Using the Results
An inspection is the start of a decision, not the end. Items that need immediate attention should be separated from conditions that can be monitored or scheduled. If the findings show widespread deterioration, recurring moisture, drainage problems, or broader system failure, the report can support comparison of repair, restoration, or replacement rather than continued spot work. Keep each report on file with photos and dates so the building has a continuous record. For the wider set of work available, see the commercial roofing services page, and the Detroit area page covers the wider region.
To schedule a commercial roof inspection in Dearborn, MI, call 517-260-3957.
Frequently Asked Questions
How often should a commercial roof be inspected?
There is no single interval for every commercial roof. Inspection timing should reflect the roof system, condition, repair history, rooftop activity, exposure, and any written maintenance or warranty requirements that apply.
Should I inspect the roof after a storm even if nothing is leaking?
Sometimes. An additional inspection is reasonable when the storm was significant, visible damage is present, a new leak appears, material has shifted, or there is another specific reason to suspect the roof was affected.
Is a roof inspection useful when buying or leasing a commercial building?
It can be. A documented inspection can identify visible roof conditions, repair needs, and areas that need further investigation. How that information is used in a transaction depends on the parties and the agreement.
What should I do with an inspection report?
Use the report to separate immediate repairs, scheduled maintenance, monitored conditions, and items that need further investigation, then keep the report and photos with the roof history.
